|
for the orifice hole?
5.43. For a siphon similar to that sketched in Fig 5.16, we want the fluid to have a velocity of 10ft/s in siphon pipe. If we assume that flow is frictionless and that the minimum pressure allowable is 1 psia, what is the maximum height that the top of the siphon may have ab
|
|
|
For example,
1.6. The American Petroleum Institute (API) gravity (used extensively in the petroleum industry) is defined, in “degrees,” by
1.14. A cubic foot of water at 68 ℉=20 ℃ weighs 62.3 lbf on earth.
1.24. The flow of fluids through product media (such as oil sand) is often described
|
|
|
fluid in the cylinder if the car is not moving?
2.42. Currently, recreational balloons are not filled with hydrogen or helium but with hot air; the pilot has a small propane burner to heat the air in the balloon.
2.45. A 150-lb drunkard falls in a vat of whiskey. Whiskey has SG=0.92, whereas
|
|
|
PROBLEM
Several problems in this section deal with ideal gas. It may be shown that for an ideal gas the enthalpy and internal energy depend on temperature alone. If an ideal gas has an constant heat capacity (which may be assumed in all the ideal gas problems in this chapter), it is very convenie
|
|
|
3.12. An ideal gas is flowing in a constant-diameter pipe at at a constant temperature. What is the relation of average velocity to pressure?
The average velocity
V_average=Q/A
V_average=m ̇/ρA
The area of pipe
A=π(d/2)^2
The ideal gas
PV=nRT
n/V=P/RT
m/MV=P/RT
ρ/M
|
|
|
New York,1975.
- Schlichting, H. Boundary Layer Theory, 7th ed., McGraw-Hill, New yo가.1979
- Perry's Chemical Engineers' Handbook, 6th ed., Robert H.Perry, Don Green 1. 실험 목적
2. 실험 이론
3. 실험 장치
4. 실험 방법
5. 문제 풀이
6. 실험 결과
7. discussion
8. reference
|
|
|
것을 알 수 있었다.
7. 참고문헌
-Lab Manual and Text for Chemical Engineering (Fluid Mechanics)
-Fluid Mechanics For Chemical Engineers 2nd Ed. Noel de Nevers McGrawHill
-핵심 유체역학 공학박사 박용호 저, 진영사
-W. L. McCabe, J. C. Smith and P. Harriott, "Unit Operations of Chemical
|
|
|
유체역학에서 배운 이론을 썼다. LPM이 높아질수록 높이차도 컸던 것을 알 수 있었는데
이 식을 통해 나온 V0(m/s)값도 LPM이 높아질수록 커졌다.
참고문헌
(1)유체역학, (주)사이택미디어, 2002
(2) Fluid Mechanics for Chemical Engineers, PH PTR, 1999
(3) Unit Opera
|
|
|
유체역학 1997, 희중당
(2) 일반공학실험 1999, 일반공학실험교재연구회
(3) 유체역학 1999, 지성출판사
(4) 유체역학, (주)사이택미디어, 2002
(5) Fluid Mechanics for Chemical Engineers, PH PTR, 1999
(6) Unit Operation of Chemical Engineering, McGraw-Hill, Inc., 1993
http://blog.n
|
|
|
문제가 있었다.
5. reference
- 화공유체역학 제2판 noel de nevers 원저
- Introduction to fluid mechanics, James A. Fay, The MIT Press
- 유체역학 기초실험, 모양우외 4명, 조선대학교 출판부
- Lab Manual and Text for Chemical Engineering (Fluid Mechanics), Yonsei University Department o
|
|
메뉴펼치기
